Changing The Default Code; Resetting The Base - SAGEMCOM D530 User Manual

Your base will remain in pairing mode for about 1 minute

Changing the default code

1 Enter the current code and validate with
2 Enter the new code and validate with
3 Re-enter the new code to confirm and validate with

Resetting the base

When you reset your base, all the settings are returned to their initial values (factory settings),
except for the phonebook.
Follow the instructions on the screen and confirm.
Modifying the base ring tone -
Scroll down the pre-recorded ring tones and validate with
System PIN
.
.
Base reset
(D530P only)
Ringer
> Settings > Base settings
.
> Settings > Base settings
> Settings > Base settings
> Ringtone
.
>
>
>
36