Removing a handset registered on the base
1
Enter the base code and confirm with
The default code is 0000.
2
Select the handset to unpair from the base and validate with
Resetting the handset
When you reset your handset, all the settings are returned to their initial values
(factory settings), except for the phonebook.
Follow the instructions on the screen and confirm.
The base
Enabling the pairing mode
You enable the pairing mode when you associate an additional handset, for example.
Give a long press on the
On the base
D530P
35
key on the base.
only, the
key flashes: the base is in pairing mode.
>
Settings
De-Register
.
>
Settings
Handset Reset
(long press)
>
Handset settings
.
>
Handset settings
>
>
Need help?
Do you have a question about the D530 and is the answer not in the manual?