Removing A Handset; Changing Your Pin Code - SAGEMCOM D77T-V User Manual

ADVANCED SETTINGS
You can select the number that you want to be associated by
pressing the corresponding numbered key (press key 1 to select
handset number 1).

Removing a handset

This function allows you to remove a handset from your base
unit. This may be necessary if a handset is lost or if you already
have 5 handsets assigned to the base unit.
Go to »Menu« / »Advanced Set« / »Unregister«.
Enter the PIN code (Personal Identification Number, factory
setting : 0000).
Press »O O K«.
the numbers of the handsets registered on the base unit appear
on the display.
Enter the number of the handset that you wish to remove.
The removed handset will show "N N on-Subscription" until it is
registered once again.

Changing your PIN code

This function is used to protect your settings against unauthorised
access; you can assign a personal identification PIN number
(0000 factory default setting).
Remark: Ensure that you remember the PIN number; it will
be required should you wish to change certain
settings.
Go to »Menu« / »Advanced Set« / »Change PIN«.
Enter the new PIN, confirm using the »O O K« key.
Enter the new PIN once more, confirm using the »O O K« key.
Remark: In the event of an error during entry the last number
can be deleted by pressing the »B B ACK« key.
26