The Base; Changing The Base Code; Resetting The Base - SAGEMCOM D680C Solo User Manual

D680C
Setting up...

The base

Changing the base code

The base code (PIN number) is 0000 by default, but can be changed to
4 other numbers. You will be prompted to enter it, when registering a
new handset.
• Press Menu
• Select Settings, press OK.
• Select Advanced settings using the  or  keys and press OK.
• Select Set base using the  or  keys and press OK.
• Select Change code using the  or  keys and press OK.
• At the "Old code" prompt, enter the old 4-digit code and then confirm
by pressing OK.
• At the "New code" prompt, enter the new 4-digit code and then
confirm by pressing OK.
• At the "Confirm code" prompt, enter the new code again and then
confirm by pressing OK.
• The action is confirmed by the "OK" indication.

Resetting the base

When you reset your base, all the settings are returned to their initial
values (factory settings), except for the phonebook.
• Press Menu
• Select Settings, press OK.
• Select Advanced settings using the  or  keys and press OK.
• Select Set base using the  or  keys and press OK.
• Select Reset base using the  or  keys and press OK.
• On a confirmation request "Base reset ?", press OK.
The action is confirmed by the "OK" indication.
•
.
.
50