Charging - SAGEMCOM D530 User Manual

Charging

To charge your phone, place the handset on the base, making sure that the base is connected
to an AC outlet.
To ensure optimum charging, leave the handset on the base for at least 15 hours when
using the phone for the first time. During charging, the batteries may heat up. This is quite
normal and perfectly safe. If you do not obtain radio contact with your base, check the
electrical connections to your base.
Battery replacement
1 Turn off the handset. Turn it over to access the battery compartment hatch.
2 Remove the battery compartment hatch.
3 Remove the old batteries, insert the new batteries one by one the right way as indicated by
their polarities.
4 Refit the battery compartment hatch.
Worn out batteries should be discarded in accordance with the recycling instructions
given in chapter "Environment", page 43.
To prevent damage to your handset, only use approved AAA format NiMH 1.2 V 600 mAh
rechargeable type batteries. Never use non-rechargeable batteries.
12