Table of Contents
Advertisement
Seen – Seen A
-
To change it, enter the new date in DD/MM/YY or MM/DD/YY format.
3.
Press
.
If you make a mistake while entering data, use keys or .
Hour format (12H/24H)
1.
Go to the menu "
2.
Change the status using the keys or .
3.
Press
.
Date format
1.
Go to the menu "
2.
Change the status using the keys or . Press
Setting the alarm
1.
Go to the menu "
To deactivate the alarm, select "OFF ".
To activate the alarm once, select "ON ".
2.
Press
.
3.
Enter the time at which you would like the alarm clock to sound: "HH – mm ".
4.
Press
. « Snooze » (repetition) is displayed on the screen. Press
"ON " : to activate alarm repetition every 5 minutes.
"OFF " : to deactivate alarm repetition.
The icon
is displayed on the screen. Your alarm is now set.
ADVANCED SETTINGS
Association of other handsets with your base
1.
Press and hold the pairing button on the base for 5 seconds (If no handset has been
detected within a minute the pairing mode will stop and your base return to standby).
2.
Go to the menu
"registration
3.
Enter the 4 digit base master PIN code (default 0000). Press
4.
The screen will display the number of the handset that has been paired with the base.
Restoring the handset / hase Default Settings
1.
Go to the menu "
2.
Enter the base master PIN code (default 0000). Press
3.
A screen displays a request to confirm.
4.
Press
.
Deleting a handset
1.
Go to the menu "
2.
Enter the base master PIN code (default 0000). Press
3.
Select the handset you want to delete using the or key then press
Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling
mode:
Go to the menu "
1.
Change the status using the keys or .
2.
Press
.
3.
" "Date & time " " time format ".
hs settings
" "Date & time " " date format ".
hs settings
" " alarm ".
hs settings
".
".
default
" " delete hs ".
Bs settings
" " Dial mode ".
Bs settings
.
.
.
15
.
.
key.
Advertisement
Table of Contents
Need help?
Do you have a question about the Seen and is the answer not in the manual?
Questions and answers
The date and time will not change from 02-04-2016 and time is HR out and will not adjust in the handset settings for date and time
To fix the date and time issue on your SAGEMCOM Seen device:
1. Go to the menu "hs settings" → "Date & time".
To set the time:
2. Select "set time".
3. Enter the correct time in HH:MM (24-hour format).
4. Press the confirmation key.
To set the date:
5. Select "set date".
6. Enter the correct date in DD/MM/YY or MM/DD/YY format.
7. Press the confirmation key.
Use the navigation keys (labeled as 5 or 6) to correct mistakes if needed.
This answer is automatically generated
@Mr. Anderson I have done this repeatedly and it is not working