Handset Set-Up; Switching The Handset On / Off - SAGEMCOM D530 User Manual

Handset set-up

1 Take the batteries provided in the packaging.
2 Turn over your handset and press the top of the hatch to
release it.
3 Insert the batteries one by one according to their polarities as
indicated in the illustration opposite.
4 Fit the hatch to the handset by pushing it up until it is
completely closed.
5 The screen turns on. Place your handset on its base and fully
charge the batteries.
6 A beep sounds when you place the handset on the base.
The battery charging icon
charging is in progress. The icon display stops moving when the
batteries are charged.

Switching the handset on / off

To switch on the handset, give a long press on the key
To switch off the handset, give a long press on the key
The message Switch off HS?
Press the key to confirm.
11
moves to inform you that
is displayed.
.
.