Modifying The Country; Restoring The Handset / Base Default Settings; Flash Timing - SAGEMCOM D16V User Manual

9.4.

Modifying the country

. Select "advanced set" using the or key, press
1. Press
2. Using the or key, select "country". Press
3. Enter the base master PIN code (default 0000). Each time a digit is entered the «_» is replaced by
a «*». Press
4. Using the or key, select the country where you will use the telephone. Press
5. A confirmation screen appears, press
The message "wait.." appears on the screen. You will hear a confirmation tone.
9.5.

Restoring the Handset / Base Default Settings

To restore the factory settings for your Handset or your Base:
1. Press . Select "advanced set" using the or key, press
2. Using the or key, select "reset". Press
3. A confirmation screen appears, press
To cancel the reset, press
English
4. You will hear a confirmation tone: the settings of your phone are restored to their initial values.
9.6.
Prefix ( Depending on Country)
If a PABX is used in a private network, you can program the outside call prefix.
This function sets:
- the PABX prefix number: this number will be added at the beginning of the number you
dialled.
- the number to be detected: if the number you dialled starts with the recorded sequence,
this sequence will be automatically deleted.
These two settings are not applied if number you dialled starts with "#" or "*".
1. Press . Select "advanced set" using the or key, press
2. Using the or key, select "auto prefix". Press
3. Select "detect digit" to define the number giving you access to the outside line.
4. Select "prefix" to specify the «digits before prefix».
5. Press key to confirm your selection. You will hear a confirmation tone.
9.7.

Flash timing

If you connect your telephone to a private automatic branch exchange or use it in a foreign country,
you may need to modify the flash duration in order to use your telephone correctly with regard to
the following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
key to confirm.
.
.
.
.
.
.
.
- If you want to confirm the reset, press -
.
.
.
- 16 -
.