Associating A New Handset; Changing The Ringing Tone; Defining Banned Calls (Parental Control); Setting The Date And The Time - SAGEMCOM D380 Manual

Setting up...

Associating a new handset

Your phone allows you to associate other handsets with the base. then you
have the pair for their recognition.
F
ROM A HANDSET REGISTERED ON YOUR BASE
To enable the pairing mode:
Menu > SETTINGS > ADVANCED SET.
REGISTR.MODE
:
OR FROM THE BASE
To enable the pairing mode, press:
(on the rear of the base)
Depending on the model:
D380: the indicator light flashes, the base is in pairing mode
D380A: the dash flashes quickly on the display.
T
HEN FROM THE NEW HANDSET
Enable the function.
Menu > SETTINGS > ADVANCED SET.
REGISTRATION
*. The indicator light is built into the button.
10
:
> SET BASE >
*
.
:
> SET HANDSET >

Changing the ringing tone

Menu > RING TONE > EXTERNAL CALL
You can change the ring tone of:
• outside calls,
• calls between handsets (intercom).
Scroll through the pre-recorded ring tones and confirm.

Setting the date and the time

Menu > SETTINGS > DATE/TIME
1 Enter the DATE: in as DD/MM/YY.
2 Enter the TIME: starting with the hours and then the minutes.
3 Confirm your entry.

Defining banned calls (Parental Control)

You can block calls to numbers with surcharged prefixes or international
calls, for example, by defining up to 5 profiles.
Menu > SETTINGS > RESTRICTION
1 Enter the base code (0000) and confirm.
2 Select an entry (from 0 to 4) and confirm.
3 Enter the prefix to be blocked and confirm.
or INTERNAL CALL