SAGEMCOM D530 User Manual page 23

Using the Conference mode
When you are already connected from the handset, you can keep the handset call and activate
the hands-free mode on the base (Conference mode).
You can also speak to your correspondent from the handset and another person can join the
conversation from the base.
Press the key on the base to (de)activate the conference mode during a call on the
handset. Once it is activated, the message
Switching between the handset and the base
During a call on the handset, press the
both on the handset and on the base (Conference mode).
You may get feedback in Conference mode if the handset is too close to the base.
• To end a call on the handset and continue on the base alone, press the
• To continue the call only on the handset and end it on the base, press the
handset then press the
• During a call, if you have placed the handset on the base; pick it up again to continue the
call on the handset alone.
23
Conference
key on the base. You will then hear your contact
key on the base.
is displayed.
on the handset.
key on the