SIXTY 2
Setting up...
The base
Changing the base code
Your base station code (default setting 0000) is required to access certain security
functions.This must contain 4 digits.
Menu >
Settings
•
Press Select.
•
Select
Advanced settings
•
Select
Set base
•
Select
Change code
•
At the
"Old
code" prompt, enter the old 4-digit code and then confirm by
pressing Select.
•
At the
"New
code" prompt, enter the new 4-digit code and then confirm by
pressing Select.
•
At the
"Confirm
pressing Select.
The action is confirmed by the "OK" indication.
Resetting the base
When you reset your base, all the settings are returned to their initial values (factory
settings), except for the phonebook.
Menu >
Settings
•
Press Select.
•
Select
Advanced settings
•
Select
Set base
•
Select
Reset base
•
On a confirmation request
The action is confirmed by the "OK" indication.
using the
using the
or
keys and press Select.
using the
or
code" prompt, enter the new code again and then confirm by
using the
using the
or
keys and press Select.
using the
or
"Reset
base?", press Yes.
or
keys and press Select.
keys and press Select.
or
keys and press Select.
keys and press Select.
56