Safety Precautions; Installing The Base - Alcatel XPS4010+ User Manual

SAFETY PRECAUTIONS

Make sure your handset for XPS-4010

charging cradle is connected to the AC outlet through the AC adapter.
To operate properly, both the handset charging cradle and the XPS-4010

must connect to an AC adapter. During power outage, the wireless part will not
work, you have to connect to a wired telephone with an external line or purchase
an UPS uninterruptible power system as backup.
Only use the supplied rechargeable Ni-MH batteries for the handset. The use of

other battery types or non-rechargeable batteries cells can be dangerous. These
may cause interference and/or unit damages.
It is normal for the battery to become hot gradually during the charging process.

It will not pose any dangerous.
 Do not let the charging cradle close to metal or wet area.
 Dispose of batteries safely. Do not burn them or put them
general household waste, they must be placed in the appropriate recycling
station.
 Do not expose the batteries to direct sunlight or extreme cold environment. Do
not put the batteries close to a heating source such as radiators, cookers, etc.

INSTALLING THE BASE

1. Plug one end of the power cable into the DC9V slot on the back of the base, and
the other end into a power outlet.
2. Plug the PSTN line into the RJ-11 jacks labeled L1, L2, L3 and L4 on the base.
3. Register each handset on the XPS-4010
package have been registered). Once registered, you can use the wireless
handsets within the signal range of the base.
4. The transmission power of this device is very low. Extended period of use does
not cause health hazard. To maximize the transmission distance, it is
recommended that you place the base in a central location of the house that is
not blocked by any obstacles. For example, in a three story house, it is
recommended to place the base on the second floor, in an obstacle free
environment. Do not place the base close to obstacles or possible sources of
interference such as metallic substances, metal cases, or walls. You can place the
base inside a wooden cabinet, glass cabinet, or on the ceiling, but not inside a
metal cabinet, or in any space blocked by metal.
+
is fully charged before first use. The
+
base (the handsets included in the
23
+
host
together with the