Elation PLATINUM SPOT LED PRO II User Manual page 35

w w w . e l a t i o n l i g h t i n g . c o m
ELATION© PLATINUM SPOT LED PRO II™
E R R O R C O D E S
Specifications and features are subject to change without any prior written notice.
ERROR CODE DESCRIPTION
The Zoom movement is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the
Zoom Er magnetic-indexing circuit malfunctions (sensor failed or magnet is missing)
or there is a stepper motor failure (defective motor or defective motor IC
drive on main PCB).
35
PLATINUM SPOT LED PRO II™ User Manual Ver 2