Elation PLATINUM SPOT LED PRO II User Manual page 23

w w w . e l a t i o n l i g h t i n g . c o m
PERSONALITY – Reset Default
When ON, all factory settings are restored.
RESET FUNCTION - Reset ALL
Reset ALL internal motors to Home Position.
RESET FUNCTION - Reset Pan & Tilt
Reset only Pan & Tilt motors to Home Positions.
RESET FUNCTION - Reset Colors
Reset only Color Wheel to Home Position.
RESET FUNCTION - Reset Gobos
Reset only Gobo Wheels to Home Positions.
RESET FUNCTION - Reset Others
Reset ALL other motors not associated previously listed commands to Home Position.
EFFECT ADJUST – Test Channel
Select and auto test each individual channel function independently from the DMX
control board.
EFFECT ADJUST – Manual Control
Select and manually test and fine adjust each individual channel function
Independently from DMX control board. This function will center PAN and TILT motors
and set dimmer to 100%. PAN and TILT functions will still operate if the fixture needs to
be positioned to a flat clear surface. With the individual functions, you can focus the
light on a flat surface (wall) and perform fine adjustments.
EFFECT ADJUST – Calibration
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION.
This function allows small adjustments to be made to the effect wheels to
compensate for ware or in the event a sensor has been knocked slightly out of
place. Because improper use of this function can result in undesired operation this
function has been password protected. The password is 050 and must be entered
each time the calibration menu function is entered. Because calibration is an
extremely delicate procedure, instructions on performing this action are left out of
this manual. For a first time calibrator, please contact our customer support team for
step-by-step instructions.
23
PLATINUM SPOT LED PRO II™ User Manual Ver 2