Elation PLATINUM SPOT LED PRO II User Manual page 34

w w w . e l a t i o n l i g h t i n g . c o m
ELATION© PLATINUM SPOT LED PRO II™
E R R O R C O D E S
Specifications and features are subject to change without any prior written notice.
ERROR CODE DESCRIPTION
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit
PAN Er malfunctions (sensor failed or magnet is missing) or there is a motor failure
(defective motor or a defective motor IC drive on the main PCB). This error
may also be displayed if the head/yoke was blocked during a reset function.
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit
TILT Er malfunctions (sensor failed or magnet is missing) or there is a motor failure
(defective motor or defective motor IC drive on main PCB). This error may also
be displayed if the head was blocked during a reset function.
The Color Wheel #1 is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the
Color Wheel 1 Er
magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or
there is a stepper motor failure (defective motor or defective motor IC drive
on main PCB).
The Rotating Gobo Wheel #1 movement is not located in the default position
after the reset. This message will appear after a fixture reset if the gobo wheel's
Gobo Rot.1 Er
magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or
there is a stepper motor failure (defective motor or defective motor IC drive
on main PCB).
The Rotating Gobo Wheel #1 Indexing movement is not located in the
default position after the reset. This message will appear after a fixture reset if
Gobo Rot.1
the gobo wheel's magnetic-indexing circuit malfunctions (sensor failed or
Indexing Er
magnet is missing) or there is a stepper motor failure (defective motor or
defective motor IC drive on main PCB).
The Static Gobo Wheel #2 movement is not located in the default position
after the reset. This message will appear after a fixture reset if the
Gobo Wheel 2 Er
magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or
there is a stepper motor failure (defective motor or defective motor IC drive
on main PCB).
The Iris movement is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the
Iris Er magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or
there is a stepper motor failure (defective motor or defective motor IC drive
on main PCB).
The Focus movement is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the
Focus Er
magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or
there is a stepper motor failure (defective motor or defective motor IC drive
on main PCB).
34
PLATINUM SPOT LED PRO II™ User Manual Ver 2