Mdb; Clock - Cino eC Pro Installation And Maintenance Manual

Table of Contents

Advertisement

cino eC PRO by
09.01.i. MDB
09.01.l. clock
MAN1010119 rel. 01 dated 30.01.2014
www.rheavendors.com
press "2" to display the variables necessary for the MDB protocol;
since cino eC PRO is unable to accommodate changegiver
payment
systems, some of
significance, even if made available; press keys "4" and "5" to
scroll the values;
- tube dispensing: to empty coins tubes;
- changegiver
enable:
to
changegiver
- maximum credit: to establish the maximum acceptable credit
amount;
- maximum change: to determine the maximum change amount;
- single/multiple vend: to keep the residual credit amount after a
dispensing cycle or not;
- token value: to quantify the value of the token;
- coins change N: to establish the coins to be used for the change
when the machine is able to give it; from A to P;
- coins no change N: to establish the coins not to be accepted
when the machine is unable to give the change; from A to P;
- set "0" to enable the changegiver; "1" to enable the changegiver
only if the change made available is enough or if there is the
RFID card; "2" to enable the changegiver only if there is the RFID
card;
- tube value: to specify the value in the ensemble of coins tubes;
this chapter is intended to determine:
- current time;
- current day;
- current month;
- current year;
- day of the week;
use the three pairs of parameters (Start FN and End FN) to
establish three time bands during which the machine will apply
"happy prices" (see 09.01.c.);
for each
day of the week you can establish a time band during
which the machine will accept no selection and reduce the water
temperature of the boiler;
to count the energy consumption of the machine;
the machine will perform a wash cycle at the time you have
specified provided that it has performed at least five dispensing
cycles after the last cycle;
tel: 0039 02 966 551
rheavendors group's sole property
these variables will
enable
the
coins
change
fax: 0039 02 96 55 086
e mail: rheavendors@rheavendors.com
be
of
no
Ejection tubes
button: 9-10-11-12
of
the
escrow enable
0=enab. 1=dis.
credit max
rest max
Sell type
0=sing. 1=mult.
Token value
coin rest a
0=acc. 1=disab. 0
coin no rest a
0=acc. 1=disab. 0
Bill validator
enab.= 0,1,2
MDB tubes value
HOUR:
00:00
DAY:
MONTH:
YEAR:
day of week:
(ex.) Tuesday
START FN:
00:00
END FN:
00:00
SWITCHING ON:
xxxxx
SWITCHING OFF
xxxxx
Kilowatt hours:
CLEANING:
00:00
page no. 33 of 52 page
N
0.00
0.00
N
0.00
N
N
= 0
0.00
00
00
00
00:00
00:00
0.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents