Table of Contents
Advertisement
cino eC PRO by
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
MAN1010119 rel. 01 dated 30.01.2014
www.rheavendors.com
if the time you have programmed is other than zero, the N product
motor will be activated at the expiry of the delay time you have
programmed; the delay time is increased or decreased by pressing
keys "4" and "5";
the rotation time of the product motor can be briefly interrupted
one or two times during the dispensing cycle (0 = no break); (see
also 13.16.);
parameter used to adjust the amount of grounded coffee will be
dispensed and filled into the coffee brewer;
if you enable this option after having compressed the ground dose,
the pump will deliver a small water quantity to make it wet, stop
and restart the usual dispensing cycle; the stop time can be here
programmed from 01 to 15;
to determine the solenoid valve opening time and then the water
quantity it will deliver; you can carry out a "time test" on the set-
point; (see 13.18.);
water will be dispensed in the mixing bowls at the expiry of the
delay time you have programmed;
the rotation time of the mixer fan can be changed by pressing keys
"4" and "5"; if time is equal to zero, the mixer will not rotate; you
can carry out a "time test" on the set-point; (see 13.18.);
if the rotation time is other than zero, the mixer fan will be rotated
at the expiry of this delay time;
the mixer rotation speed can be regulated between low, medium,
high by pressing keys "4" and "5";
to establish the delay between the second milk and the espresso
coffee dispensing cycle in the "Latte macchiato" selection;
to establish the milk quantity of the second dispensing cycle;
to determine the delay of the second milk dispensing cycle;
to determine the breaks of the second milk dispensing cycle;
to establish the water quantity of the second milk dispensing cycle;
to determine the water quantity delay of the second milk
dispensing cycle;
to establish the mixer rotation time of the second milk dispensing
cycle;
if other than zero, the mixer power on will be delayed by the time
you have set up;
to determine mixer rotation speed of the second milk dispensing
cycle;
to specify the product canister to be used for the milk dispensing
cycle;
to establish the water to be used for the second milk dispensing
cycle;
tel: 0039 02 966 551
rheavendors group's sole property
fax: 0039 02 96 55 086
e mail: rheavendors@rheavendors.com
start delay
PRODUCT N
0.0
breaks number
0-1-2
00
coffee time
grinder
0.0
T. AFTER PREINF.
0=NO
SEC.:00
WATER N time
0= inhib.
0.0
start delay
WATER N
0.0
MIXER N
0= inhib.
0.0
start delay
MIXER N
0.0
MIXER speed
N
medium
Latte-Macchiato
start brewer 0.0
PRODUCT LM
0= inhib.
0.0
start delay
PRODUCT LM
0.0
breaks number
0-1-2
00
WATER LM time
0= inhib.
0.0
delay water LM
0= inhib.
0.0
MIXER LM
0= disab.
0.0
start delay
MIXER LM
0.0
MIXER LM speed
medium
PRODUCT
MILK LM
n: N
LM Milk water
Number=
0
page no. 28 of 52 page
Hide quick links:
Advertisement
Table of Contents
