Installation - Kenwood CK 305 Instructions For Use Manual

8 - INSTALLATION

This cooker has class "2/1" overheating protection so that it can be installed next
to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 200 mm must be left between the side of the cooker and the furniture .
The furniture walls adjacent to the cooker must be made of material resistant to heat .
The veneered synthetic material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations .
Curtains must not be fitted immediately behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below .
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent
falling out .
The cooker must be installed by a suitable suitable qualified technician and in
compliance with local safety standards.
Fig. 8.1
25