Table of Contents
Advertisement
9 - INSTALLATION
This cooker has class "2/1" overheating protection so that it can be installed next
to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 50 mm must be left between the side of the cooker and the furniture.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetic material and the glue used must be resistant to a temperature of 90°C
in order to avoid ungluing or deformations.
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not
in a room or space containing a bath or a shower.
The appliance must not be installed in a bed-sitting room of less than 20 m
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent
falling out.
The cooker must be installed by a qualified technician and in compliance with local
safety standards.
All manuals and user guides at all-guides.com
3
.
Fig. 9.1
23
Advertisement
Table of Contents
