Kenwood CK 305 Instructions For Use Manual page 37

Electrical feeder cable
connection
The operations must be executed by a
qualified technician .
To connect the supply cable:
- Remove the screws securing the cover
"A" on the rear of the cooker (fig . 10 .1) .
- Unscrew cable clamp "D" (fig. 10.2).
- Connect the wires to the terminal block
"B" as shown in the diagram in figure
10 .3 .
- Take up any slack in the cable and
secure with the cable clamp "D" .
- Replace the cover "A" .
N .B . The earth conductor must be left
about 3 cm longer than the others .
Feeder cable specifications
TYPE "H05RR-F"
~
230 V 3 x 1,5 mm
2
A
Fig . 10 .1
Fig . 10 .2
230 V
L PE N
1
Fig . 10 .3
B
D
(L )
2
37