Electrical Section; Electrical Installation - Kenwood CK 305 Instructions For Use Manual

10 - ELECTRICAL INSTALLATION

WARNING!
ELECTRICITY CAN BE EXTREMELY DANGEROUS.
THIS APPLIANCE MUST BE EARTHED.
The appliance must be connected to the electrical network verifying above all that the
voltage corresponds to the value indicated on the specifications plate and that the cables
section of the electrical plant can bear the load which is also indicated on the plate .
It is recomended that the appliance is connected directly to the mains by fixed wiring,
placing a double pole switch with minimum opening between the contacts of 3 mm .
Alternative connection methods may be available as long as they conform to current IEE
wiring regulation .
The power supply cable must not touch the hot parts and must be positioned so that it does
not exceed 75°C at any point .
Once the cooker has been installed, the switch must always be accessible .
Before effecting any intervention on the electrical parts the appliance must be
disconnected from the network.
Warning!
Electricity can be extremely dangerous.
This appliance must be earthed.
36