Swing
4.
Swing setup
① Select the swing number
② Set the first position number to the 1st Position, the second position number to 2nd position.
③ Set the Speed and Dwell Time for swing.
④ Click „Apply button'. Then Swing setting is finished and [Undefined] will disappear.
Delete Swing
① Select the swing number to delete.
② Set the value as "Not used" in 1st Position and 2nd Position and click "Apply button‟.
Then Swing is deleted and [Undefined] will be displayed for assigned swing numbers.
Run Swing
① Select swing number to run.
② Click „Run Swing button'. When the swing function is running, you can check the swing speed
and Dwell time.
Direction
- Select the pan direction for swing. It supports 3 types of pan directions. (Shortest, Clockwise and
Counter Clockwise)
CGI preset commands from 41 to 48 are assigned to run swing.
Megapixel Speed Dome Camera Instruction Manual
CONFIGURATION
25/37
3