Installation Using Wall Mount Bracket - CBC PT118XT-HD User Manual

Installation using Wall Mount Bracket

①Make a hole diameter between 30~40mm
on the mounting surface to pass the wire(s)
and cable(s) through the mounting surface.
(In case of the wiring and cabling through
the mounting surface only) Then prepare
the wall mount bracket. Pull the wire(s) and
cable(s) for the system as below. Attach the
wall mount bracket to the mounting surface.
(Hex Lag #1450)
③ Assemble the dome cover with safety
wire of main body and screw the main body
with dome cover. After assembly, remove
protection vinyl from dome cover.
Important Notice
 Before starting the installation, make sure that the Camera ID and Protocol are set up correctly.
Megapixel Speed Dome Camera Instruction Manual
INSTALLATION
② Pull the wire(s) and cable(s) for the
system through. Before connecting cables,
hook the safety wire inside the adaptor to
the cameras main body. Wire the cable(s) to
the camera connections. After assembly,
attach the camera to the bracket with 3r
screws. (Machine M515)
2
13/37