Preset; Swing - CBC PT112N User Manual

Preset

Function
Set Preset
Run Preset
Delete Preset

Swing

Function
Set Swing
Run Swing
Delete Swing
Speed Dome Camera Instruction Manual
Max. 127 positions can be stored as Preset position. The Preset number can be
assigned from 1 to 128, but 95 is reserved for starting OSD menu.
Camera characteristics (i.e. White Balance, Auto Exposure) can be set up
independently for each preset. Label should be blank and "Camera Adjust" should be
set to "GLOBAL" as default. All characteristics can be set up in OSD menu.
<Set Preset> [1~128]
<Go Preset> [1~128]
To delete Preset, use OSD menu.
By using Swing function, the camera can move between 2 Preset positions repeatedly.
When swing function runs, camera moves from the preset assigned as the 1st point to
the preset assigned as the 2nd point in CW (Clockwise) direction. Then camera moves
from the preset assigned as the 2nd point to the preset assigned as the 1st point in
CCW (Counterclockwise) direction.
1st Preset
If the preset assigned as the 1st point is the same as the preset assigned as the 2nd
point, the camera will turn 360° in a CW (Clockwise) direction, then 360° in a CCW
(Counterclockwise) direction.
Speed can be set up from 1°/sec to 180°/sec.
To set Swing, use OSD menu.
Method 1) <Run Pattern> [Swing NO.+10]
Method 2) <Go Preset> [Swing NO.+140]
To delete Swing, use OSD menu.
OPERATION
2nd Preset
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]
3
19