Pattern
5.
Pattern setup
① Select the pattern number to set.
② Move to the field of view to the start position using PTZ Controller.
③ Click „Set Pattern Start button‟ to begin Pattern recording.
④ The when you move camera using PTZ Controller the function will memorized the speed and
path.
⑤ Click „Set Pattern Stop‟ button. Then Pattern setting is finished and [Undefined] will disappear.
.
Delete Pattern
① Select the pattern number to delete..
② Click „Delete Pattern button‟. Then selected Pattern is deleted and [Undefined] will be
displayed again.
Pattern action
① Select the pattern number to run.
② Click „Run Pattern button‟. Then the assigned pattern activate.
CGI preset commands from 31 to 34 are assigned to run pattern.
Megapixel Speed Dome Camera Instruction Manual
CONFIGURATION
26/37
3