Ptz Configuration; Basic Configuration; Rs485 Configuration - CBC PT118XT-HD User Manual

PTZ configuration

Basic configuration

1.
- Use to set the basic PTZ operation, such as to control the speed of Pan/Tilt/Zoom/Focus and Auto Flip
function.

RS485 configuration

2.
- Setup to control PTZ with external Controller devices though RS485 port. You should set the speed,
protocol and address to match the controller devices.
 Protocol mode
Use to set the speed, protocol and address instead of using external DIP switch settings. On

Software, the camera values can be set via Web browser.
 Speed/ Protocol/ Address
You should set values to match Controller devices.

Megapixel Speed Dome Camera Instruction Manual
CONFIGURATION
23/37
3