Preset; Swing - CBC PT110N User Manual

Preset

Function
Set Preset
Run Preset
Delete Preset

Swing

Function
Set Swing
Run Swing
Delete Swing
Speed Dome Camera Instruction Manual
Max. 127 positions can be stored as
assigned from 1 to 128, but 95 is reserved for starting OSD menu.
Camera char acteristics (i.e. White Balance, Auto Exposure) can be set up
independently for each preset. Label should be blank and "Camera Adjust" should
set to "GLOBAL" as default. All characteristics can be set up in OSD menu.
<Set Preset> [1~128]
<Go Preset> [1~128]
To delete Preset, use OSD menu.
By using Swing function, the camera can move between 2 Preset positions
When swing function runs, camera moves from the preset assigned as the 1st point to
the preset assigned as the 2nd point in CW (Clockwise) d
fr om the preset assigned as the 2nd point to the pr
CCW (Counter clockwise) direction.
1st Preset
If the preset assigned as the 1st point is the same as the preset assigned as the 2nd
point, the camera will turn 360° in a CW (Clockwise) direction, then 360° in a CCW
(Counterclockwise) direction.
Speed can be set up from 1°/sec to 180°/sec.
To set Swing, use OSD menu.
Method 1) <Run Pattern> [Swing NO.+10]
Method 2) <Go Preset> [Swing NO.+140]
To delete Swing, use OSD menu.
OPERATION
Preset position. The Preset number can be
irection. Then camera moves
eset assigned as the 1st point in
2nd Preset
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]
3
be
repeatedly.
19