Sensor And Relay - CBC PT118XT-HD User Manual

Event setup

1. Sensor and Relay

 Sensor
Use

Select to activate/deactivate a sensor.
Type

Select the sensor type between NO/NC.
Delay

Set the delay time after sensor is working. During the delay time the Camera does not treat
another sensor signal as the event and will ignore it.
Camera

Select the camera to connect. The selected camera stream will be used for Sensor Preset,
Emergency Alarm.
Preset

Select the preset position for the camera to the move when sensor has been activated
Relay

Select the relay to work when sensor has been activated.
Duration

Set the duration that the Relay remains active.
 Relay activation
Use

Check the box to enable/disable the relay activation.
Name

Enter the name for the relay device.
Activity Time

Set the activity time. The relay can only work during the assigned time.
Megapixel Speed Dome Camera Instruction Manual
CONFIGURATION
28/37
3