L2 Functions > Lldp > Lldp Management Address Table; L2 Functions > Lldp > Lldp Local Port Table - D-Link SmartPro DGS-1500-20 User Manual

5 Configuration
From Port/To Port: A consecutive group of ports may be configured starting with the selected port.
Address Type: Specify the LLDP address type on the port. The value is always IPv4.
Address: Specify the address.
Port State: Specify whether the Port State is enabled n the port. The possible field values are:
Enabled – Enables the port state configured on the port.
Disabled – Disables the port state configured on the port.
Click Apply to implement changes made.
L2 Functions > LLDP > LLDP Management Address Table
The LLDP Management Address Table page displays the detailed management address information for the
entry.
Management Address: Specifies IPv4 or MAC address then enter the address. Click Search and the table
will update and display the values required.
Subtype: Displays the managed address subtype. For example, MAC or IPv4.
Management Address: Displays the IP address.
IF Type: Displays the IF Type.
OID: Displays the SNMP OID.
Advertising Ports: Displays the advertising ports.
L2 Functions > LLDP > LLDP Local Port Table
The LLDP Local Port Table page displays LLDP local port information.
Figure 5.56 – L2 Functions > LLDP >LLDP Management Address Settings
Figure 5.57 – L2 Functions > LLDP >LLDP Management Address Table
D-Link Web Smart Switch User Manual
50