Power switch
The power switch is attached to the left, front of the chassis.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Rotate the drive cage to its upright position.
5.
From the inside of the front of the chassis, press the tab at the top of the power switch (1) and push the
top of the power switch away from the front of the chassis (2).
6.
Remove the cable from the clips built into the bottom of the chassis (1).
106 Chapter 5 Removal and replacement procedures – small form factor (SFF) chassis
(Preparation for disassembly on page
(Access panel on page
73).
(Front bezel on page
73).
72).