Installing A Slim Optical Drive - HP EliteDesk 705 G1 Desktop Mini Maintenance And Service Manual

5. Push inward on the green release latch on the underside of the drive (1) and push the rear of the drive
forward to unlock it (2), and then slide the drive out of the drive bay (3).

Installing a slim optical drive

1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
bezel blank, remove the bezel blank. See
4. Follow the instructions for removing the optical drive if one was installed. Refer to
optical drive on page
5. Align the small pins on the release latch with the small holes on the side of the drive and press the latch
firmly onto the drive.
52 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 38). If you are installing a device in a bay covered by a
Optical drive bezel blank on page 39
51.
37).
36).
for more information.
Removing a slim