Introduction - AV TOOL AVT-3350 Instruction Manual

1.0

INTRODUCTION

Thanks for purchasing this product from the AV Toolbox Division of TV One. The
AVT-3350 Analog Video to PC/HD Scaler is designed to convert interlaced NTSC
or PAL Video––S-Video or Composite Video format––to XGA, SXGA or UXGA
resolutions which allows the viewing of standard television images on your PC
monitor. The analog video input is also converted to HD resolutions of 480p to
1080p for viewing on an HD capable component television. In addition, 3D (frame
based) Motion Adaptive YNR/CNR noise reduction, Advanced 3D Motion
Adaptive De-Interlacing and Automatic 2:2 and 3:2 Film Mode Detection are all
standard features. AV Toolbox offers a wide range of video, audio and
multimedia products.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. AV
Toolbox cannot be held liable for the use of this hardware or any direct or indirect
consequential damages arising from its use. It is the responsibility of the user of
the hardware to check that it is suitable for his/her requirements and that it is
installed correctly. All rights reserved. No parts of this manual may be
reproduced or transmitted by any form or means electronic or mechanical,
including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.
AV Toolbox reserves the right to revise any of its hardware and software
following its policy to modify and/or improve its products where necessary or
desirable. This statement does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The AV Toolbox logo is
a trademarks of AV Toolbox. All other trademarks are the property of their
respective holders.
1.2 Features
•
Automatically detects either NTSC or PAL Television Inputs.
•
Either Composite or S-Video (Y/C) Inputs
•
High Res PC Video outputs: XGA, SXGA, UXGA
•
Component HD resolutions of 480p to 1080p
•
3D (Frame Based) Motion Adaptive YNR/CNR Noise Reduction
•
3D Motion Adaptive de-interlace
•
Automatic 2:2 & 3:2 Film Mode Detection
•
50/60 Hz Frame Rate Conversion
•
On Screen Display
•
1 Year Parts and Labor Warranty
•
Light Weight – Less than .20 pound
•
Ergonomically Friendly Design
2