Tabm; Tabm Procedures - 3Com ACCESSBUILDER 4000 Installation Manual

B-2 A B: R
PPENDIX

TABM

TABM Procedures

S U /D
EMOTE OFTWARE P OWNLOADING
This method (preferred) uses TABM to perform the desired
upload/download function over an IP network (requires a TFTP server to be
available -- normally specified as part of the TABM installation procedure).
You must have TABM installed on your workstation and can see the target
AccessBuilder on the All Servers View list. You will also need to know the
password for the target AccessBuilder.
TFTP Server
Figure B-1 Remote Download/Upload Using TABM
Before starting TABM on your workstation, be sure the files you plan to
download into the remote AccessBuilder (image or configuration) are
loaded on the TFTP server. These files are provided on one of the TABM
distribution diskettes. Copy the files absrvr.cde, absrvr.hd0, absrvr.hd1, and
absrvr.hd2 to the TFTP host's directory.
CAUTION: Whenever an image or configuration file download transfer
occurs, the remote AccessBuilder suspends any user session in progress and
automatically resets upon completion, thus disconnecting any active users.
For this reason, maintenance downloads should be announced to the
system users well in advance of the event, and scheduled at a time that
minimizes network disruption.
P
ROCEDURES
Remote Access Server
Target AccessBuilder
TABM on
Work Station
AccessBuilder
4000
SYSTEM STATUS
Activity Status Power