Configuring An Accessbuilder Using Guided Configuration; Remote Client Configuration; Appletalk Clients - 3Com ACCESSBUILDER 4000 Installation Manual

3-16 C 3: C
HAPTER ONFIGURATION
Configuring an
AccessBuilder
Using Guided
Configuration
Remote Client
Configuration

AppleTalk Clients

U T
SING RANSCEND
Guided Configuration enables a more comprehensive configuration of the
AccessBuilder than does the Basic Configuration.
When an AccessBuilder server is displayed in the external view window,
choose Guided Configuration from the System menu. Each of the following
dialog boxes are then displayed, in sequence:
System
Protocols
Asynchronous Ports/ISDN Ports
Remote Users
To perform a Guided Configuration, follow these steps (refer to the on-line
help as necessary):
1 Double-click the new server's name/address in the list of servers displayed
in the All Servers List View. The single-server external view appears for the
server you selected.
2 From the Configuration menu, choose Guided Configuration. The Guided
Configuration procedure displays each required dialog box in sequence.
3 Complete each dialog box (choose the Help button in each dialog box for
detailed instructions).
When you have finished filling out the last dialog box, the AccessBuilder
server is ready to use for individual-to-LAN operation. Be sure your remote
clients are configured to connect to the AccessBuilder. Also note that the
AccessBuilder must be reboot in order for the new values to take effect.
Once you have finished configuration of the AccessBuilder server, you will
want to ensure your remote clients have successfully installed their remote
access client software. Refer to the AccessBuilder server Release Notes for
current information regarding the various client type supported.
The AccessBuilder supports AppleTalk clients using the Apple Remote
Access (ARA) software. Refer to the Apple documentation provided with the
ARA software for installation details.
A B M
CCESS UILDER ANAGER
(TABM)