Table of Contents
Advertisement
TABM Software
Installation
WINSOCK.DLL. from the vendor. For LAN Workplace, the required files are
WINSOCK.DLL and NOVASYNC.EXE.
IPX Networks. This utility requires that you have Windows version 3.1 or
later installed on your PC, and Novell NetWare Windows Client version 3.12
or later. You must also have a NetWare server on your network.
Version 3.2 of the Transcend AccessBuilder Manager application is provided
on CDROM. An extraction utility is provided to automatically install the
TABM software from the CDROM to your local hard drive, a network server
hard drive, or onto two diskettes.
Once installed, TABM is then used to configure your AccessBuilder remote
access servers. For convenience, basic configuration information can be
collected using the Configuration Worksheets provided in Appendix D.
The following functional key conventions are used within TABM:
Table 3-1
Key Label
OK
Apply
Change
The following procedure assumes installation from diskettes. If you are
installing from CD-ROM, refer to the instructions in the CD-ROM insert.
1 Start Microsoft Windows and open the Program Manager window.
2 Insert the diskette labelled "Transcend AccessBuilder Manager for Windows,
Diskette 1" into a diskette drive on the Windows workstation.
3 From the File menu, choose Run [Alt] + [F] + [R].
4 In the Run dialog box edit box type A:\SETUP and choose OK to invoke the
installation utility.
TABM Software Installation
Function
Apply changes made to the AccessBuilder,
then closes the dialog box.
Apply changes made to the AccessBuilder,
but leaves the dialog box open.
Store the changes made locally without
sending them to the AccessBuilder.
3-3
Advertisement
Table of Contents
