Table of Contents
Advertisement
3-6
C
3: C
U
T
A
B
M
(TABM)
HAPTER
ONFIGURATION
SING
RANSCEND
CCESS
UILDER
ANAGER
protocol stack is not installed on your workstation. Should this warning
screen appear, TABM will not be able to communicate with AccessBuilders on
the network:
9 (IP Only) The TFTP Server Directory box appears (Figure 3-5) and requests
the path of the TFTP server, which is used to upload and download
AccessBuilder configuration and system files from and to the AccessBuilder
server from a computer's disk file. If the TFTP server is on the same
computer on which you are installing the TABM software, enter the path to
the TFTP server now, then click the OK button. If the TFTP server is on a
different system, or you do not plan on using the upload/download feature,
click the Cancel button now.
Figure 3-5 TFTP Server Directory Dialog Box
If your TFTP server is installed on a different computer, be sure to copy the
following files from the "Transcend AccessBuilder Manager for Windows"
installation diskette to the hard disk directory that contains the TFTP server
application files: ABUPCFG.HD0, ABUPCFG.HD1, ABUPCFG.HD2,
ABDNCFG.HD0, ABDNCFG.HD1, and ABDNCFG.HD2.
10 (IP Only) The AskPath dialog box appears (Figure 3-6) and requests the path
of the Ping and Telnet utilities included with your TCP/IP stack. Note that
both program files must be in the same directory. Enter the full path of the
directory containing the Ping and Telnet utilities. If the program names of
Advertisement
Table of Contents
Need help?
Do you have a question about the ACCESSBUILDER 4000 and is the answer not in the manual?
Questions and answers