Basic Configuration - 3Com ACCESSBUILDER 4000 Installation Manual

Basic
Configuration
information is downloaded into the new AccessBuilder which then appears
in the All Servers List View. You now are ready to proceed with a more
specific AccessBuilder configuration.
1 From the All Servers List View, double click on the AccessBuilder you wish to
configure.
2 The SuperUser Password Dialog Box then appears asking for the superuser
password for your selected AccessBuilder. If this is a new AccessBuilder that
has never before been configured, simply press the Return key (no
SuperUser password).
3 You now have two choices: Basic Configuration, or Guided Configuration.
At this point, refer to TABM's on-line help and cue cards for further
instructions in performing the configuration procedure.
We recommend that you complete the Configuration Worksheets provided in
Appendix D prior to performing either Basic or Guided Configuration for
fastest and most accurate results.
The TABM Basic Configuration selection is the quickest means of getting an
AccessBuilder up and running with a minimum configuration for individual
to LAN access for both IP or IPX networks.
Assuming you have entered the initial configuration parameters, the Basic
Configuration procedure can be completed:
1 From the Configuration menu, choose Basic Configuration.
2 Enter the System Greeting and the Time and Date information into their
respective edit boxes (use the on-line help as required).
3 Click on the Remote Users button. Enter the requested information for each
remote user (use the on-line help as required).
4 Click on the Async Ports and/or ISDN Ports button. Enter the requested
information for each port (use the on-line help as required).
Basic Configuration
3-15