Table of Contents
Advertisement
2.4 I
NSTALLING THE RECORDER
CAUTION: Recorder Orientation
The recorder must be installed vertically upright on a surface adequate to bear its full
weight.
Failure to comply with these instructions will invalidate the warranty.
CAUTION: Ventilation Clearance
Ensure recorder has sufficient clearance when installed. Refer to Fig. 2.1)
2.4.1 W
IRING AND INSTALLING THE RECORDER
WARNING:
You must complete steps 1) to 5) of this installation before supplying power to the
unit. The recorder requires a 24V AC or DC power supply – this is not the same as
the camera, which requires a 12V DC supply. Applying the wrong voltage to the
recorder may damage it and will also invalidate the warranty.
Refer to Fig. 2.2 for step 1)
1)
Attach the plastic support bracket to the body of the
recorder using the three screws supplied. Use only these
screws and be sure to fit all three screws.
CAUTION:
Take care when handling the
recorder: the device is heavy.
Fig. 2.2) Connecting the plastic support bracket
Recorder Installation Manual v3.14
to the base of the recorder
Fig. 2.1) Ventilation
clearances.
Keep 200mm / 8" clear
above the recorder for
ventilation purposes.
Page 9
Advertisement
Table of Contents
