Selecting The Current Device; Status Of The Connection; Device Parameters - Philips LaserMFD LFF 6080 User Manual

LFF6080
identify your PC.
7 Click on the OK button.
8 Select the desired print language for your printer
and click on N
9 The next window lists the different features of the
printer that are about to be installed. Click on the
N button.
EXT
10 The window indicating that the installation
procedure was successful pops up. Click on the
F button.
INISH

Selecting the current device

Only one device at a time may be connected to the PC.
The current device may be selected by clicking on the
radio button corresponding to the device.
Please note that it is not possible to get both LAN and
WLAN connections working at the same time for a single
device.

Status of the connection

The status of the connection between the current device
and the PC is indicated by a colour. The following table
defines the possible states of the connection.
Colour
Yellow
Connection in progress.
Green
Connection established.
The PC cannot connect to the device.
Red
Check the USB or network connection.
Downloaded From ManualsPrinter.com Manuals
.
EXT
State

Device parameters

1 Select a device by clicking on its line in the list and
click on P
ROPERTIES
parameters to be applied for this device when you
use the S T
CAN
2 Select the desired scan M
menu.
3 Select the desired scan R
down menu.
- 68 -
to configure the scanning
function.
O
in the drop-down
ODE
in the drop-
ESOLUTION