Philips LaserMFD LFF 6080 User Manual page 44

LFF6080
Parameter
82 - Form lines
83 - Font pitch
84 - Ptsize
85 - Line termin.
86 - Orientation
90 - RAW Port
91 - Printer error
timeout
92 - Printer wait
timeout
93 - Replace format
Downloaded From ManualsPrinter.com Manuals
Signification
This parameter lets you set the
number of lines per page.
This variable is linked to the PJL
variables: PAPER and
ORIENTATION. If you modify one
of these variables, the Form Lines
variable is automatically updated
(only for the print job in progress)
to respect the same spacing.
The possible values are included
between 5 and 128 inclusive. The
default value is 60.
This parameter lets you set the
default font spacing, in characters
per inch (the default font must be
of type non-proportional).
The possible values are included
between 0,44 and 99,99 inclusive.
The default value is 10,00.
This parameter lets you set the
default font height, in points (the
default font must be of type
proportional).
The possible values are included
between 4,00 and 999,75 (by step
of 0,25). The default value is
12,00.
This parameter lets you define line
breaks conversion: <CR>, <LF>
and <FF>.
The possible values are included
between 0 and 3. The default value
is 0.
This parameter lets you set the
page orientation: portrait or
landscape. The default value is
"portrait".
RAW network print port
connection.
Time-out before document being
printed is deleted following a print
error in PC print mode.
Wait time-out for data from PC
before the task is deleted in PC
print.
Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
Parameter
This parameter lets you set the
95 - Symbol set
default character set. The possible
values are included between CS1
and CS30 included. The default
value is CS1 (Roman8).
96 - NBR. WEP Number of WEP keys allowed
Keys
(from 1 to 4).
- 38 -
Signification