Adjust To Page; Received Faxes Reduction Mode; Technical Parameters - Philips LaserMFD LFF 6080 User Manual

LFF6080
confirm with OK.
If a code is already registered, enter
Important the old code before typing the new
one.
3 Enter again your lock code (4 digits) with the
keyboard, confirm with OK.
4 Quit this menu by pressing the
To access the Fax server settings locking menu:
8332- ADVANCED FCT / FAX SERVER / LOCK /
1 Press , enter 8332 using the keypad.
2 Enter the four-digit locking code with the keypad.
3 Press OK to confirm.
4 With the buttons
with OK.
5 Quit this menu by pressing the

Adjust to page

This menu allows you to print out received faxes
automatically adjusting them to the page format.
Received faxes are then automatically reduced or
enlarged to fit the page format which is used on the
machine.
To turn adjust to page mode on:
245 - SETUP / RECEPTION / ADJUST PAGE
1 Press , enter 245 using the keypad.
2 Select the option ON or OFF and confirm with OK.
3 To exit this menu, press

Received faxes reduction mode

This menu allows you to reduce received faxes for
printing. This adjustment can be automatic or manual.
Automatic mode:
This mode automatically resizes received faxes.
To set automatic mode:
246 - SETUP / RECEPTION / REDUCTION
1 Press , enter 246 using the keypad.
2 Select AUTOMATIC and confirm with OK.
3 To exit this menu, press
Manual mode:
The machine proposes a 70 to 100 % reduction. Outside
these values, the machine beeps for error. This fixed
reduction will be used when printing received documents,
regardless of the used paper format.
Downloaded From ManualsPrinter.com Manuals
button.
LOCK ACCESS
or , choose ON and confirm
button.
.
.
To set the manual mode:
246 - SETUP / RECEPTION / REDUCTION
1 Press , enter 246 using the keypad.
2 Select FIXED and confirm with OK.
3 Enter the reduction value (between 70 and 100)
and confirm with OK.
4 To exit this menu, press

Technical Parameters

As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
1 Press , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys
settings by following the table below and press OK.
Parameter
1 - Scanning mode Default value of the scan mode
resolution for the documents to be
transmitted.
Important: this parameter is by
2 - TX header
default activated on the US model
and cannot be modified.
If this parameter is on, your header
will appear on all documents sent
to your subscribers with your
name, number, date and number
of pages.
Warning: If you send a fax from
the document loader, the
transmission header will not
appear on the document your
correspondent receives.
Transmission speed for outgoing
3 - TX speed
documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary to
restrict the transmission speed for
some calls.
4 - Echo protect If this parameter is on, the on-line
echo will be reduced during long
distance calls.
- 36 -
.
29 - SETUP / TECHNICALS
or , modify the parameter
Signification