Saving Your System Configuration To A Usb Thumb Drive - FLIR DNR516 Instruction Manual

15 Using the Main Menu
To set the monitor resolution:
1. From the Main Menu, click
2. Under Resolution, select the correct resolution for your monitor: 1920x1080,
1280x1024, 1280x720, or 1024x768.
3. Click OK to save changes. Click OK again to restart the system using the new
resolution.
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the
live display. This setting does not affect recordings.
• Original Scale: Check to set the system to show the true aspect ratio of the cam-
eras on the live display. This may add black bars to the top and bottom of the image.
3. Click OK to save changes.

15.3.26 Saving Your System Configuration to a USB Thumb Drive

The system allows you to save your current system configuration to a USB thumb drive
(not included). This is useful if you want to backup your current settings.
#LX400023; r. 1.0/17332/17359; en-US
and then click Setting>Display>Display.
and then click Setting>Display>Display.
75