Using The System; On-Screen Display - FLIR DNR516 Instruction Manual

9

Using the System

Use the system's graphical on-screen display to navigate menus and configure options
and settings.
Note
Up to four channels at a time may be viewed using the system's high definition Main Stream. If more than
four channels need to be viewed, additional channels will be displayed using the lower resolution Sub
Stream. Although the live display picture will not be as sharp on these channels, all channels will still be
recorded in high definition by default.

9.1 On-Screen Display

The system shows the following for all display views:
1. Display area:
• Double-click on a channel to view in full-screen; double-click again to return to split
screen.
• Right-click to open the Quick Menu.
• Left-click to open the Navigation Bar.
• Move the mouse to the top of a channel to view the Camera Toolbar.
• Click-and-drag cameras to rearrange the channel display. This does not affect the
channels each camera is connected or recording to.
2. Channel name
3. C: Camera is continuously recording.
4. M: Motion has been detected.
5. Date & time: Current system date and time. For details on setting the date and time,
see 10 Setting The Time, page 25.
#LX400023; r. 1.0/17332/17359; en-US
19