Table of Contents
Advertisement
6. Operating Instructions
6.1 TERMINAL INSTALLATION
6.1.1 Please ask the qualified engineers to install it.
6.1.2 Do not install it in a environment which is more than GSM performance,
And please pay attention to fix the antennas in a exactly position with good
signals.
6.1.3 Pay attention to make installation location preventing water and dust.
6.1.4 Find the 10 PIN harness and insert it into the corresponding holes of the
products, and connect the wires with the original car circuit showing below:
6.1.5 Note: The orange wire can be connected to the original car alarm horn; it
can also be connected to the siren you buy with the tracker. (Siren is
Option)
8
Wiring diagram
Hide quick links:
Advertisement
Table of Contents
