Table of Contents
Advertisement
6.1.6 Knowing about the type of the door trigger is positive or negative trigger.
Please connect the green wire to the door control circuit if it is positive, and
connect blue wire if it is negative.
6.1.7 Please install the Reset button and SOS button on the place driver can
touch.
6.1.8 Insert the shake sensor plug into the sensor jack. (Shake sensor is Option)
6.1.9 Insert the external monitor Microphone into the monitor jack.
6.1.10 Connected the GPS and GSM antenna to the right jack, and find a
appropriate place and fix the antennas to make sure it receive signals very
well.
6.2 SIM CARD INSTALLATIONS
6.2.1 Use a tweezers or a sharp thing to touch the SIM CARD popup switch, the
SIM CARD slot will pop up, take out the SIM card slot and put SIM card
in it. And then put the SIM card slot back to its original position after
confirm the SIM card in the right place.
6.2.2 Please make sure that the SIM card is able to execute the function of
incoming calls display, no calls can be diverted and the PIN code is
locked. The SMS format must be TXT format, and can't recognize the
PDU format.
6.3 Turn on the Tracker Device.
6.3.1 Connect the positive and negative wire, red and black ones, with 12V or
24V car power system, wait for 1 minute after connecting power to wait
tracker works normal, and then turn on the backup battery switch.
9
Hide quick links:
Advertisement
Table of Contents
