Customising The System - Basic Menu - Key Automation CT102 24 Instructions And Warnings For Installation And Use

EN
DELETING A TRANSMITTER
1. Exit the programming menus by pressing MENU.
2. Press and hold "DOWN" until the text "
3. Release the button. At this point the display shows the text alternated with "0".
4. Press MENU until the number "0" appears and to the left a dot that moves up and down continuously.
5. Press the button of the transmitter to be deleted.
6. If the procedure is completed correctly, the text "
7. To exit the deletion procedure, briely press MENU or wait for exit after the timeout (8 seconds).
N.B. During deletion, if the dot alongside does not move, this means that the receiver is receiving unmemorised codes.
DELETING THE MEMORY OF TRANSMITTERS
1. Exit the programming menus by pressing MENU.
2. Press and hold "DOWN" until the text "
3. Release the button. At this point the display shows the text alternated with "0".
4. Briely press UP or DOWN until the text "
5. Press MENU until the number "0" lashes on display.
6. Release the button then use "UP" to bring the displayed value to 1.
7. Press and hold MENU.
8. If the procedure is completed correctly, the text "

4.5 - Customising the system - BASIC MENU

If necessary, users may select a BASIC MENU which allows modi-
ication of the control unit's basic parameters. To select the BASIC
MENU proceed as described below.
Exampling of modifying a BASIC MENU parameter
UP DOWN
MENU
Press the MENU key for 1 se-
cond to access the basic menu.
UP DOWN
MENU
Press the MENU key for 1 se-
cond to display the parameter
in order to save the modiied
value, or MENU quickly to quit
the function without saving.
24
CS.r.
" (Clear single Remote) appears on display.
don
" is displayed.
CS.r.
" (Clear single Remote) appears on display.
CA.r.
" (Clear All Remote) appears.
don
" is displayed.
UP DOWN
MENU
After accessing the BASIC
MENU, press the + and – keys
to scroll through the functions.
UP DOWN
MENU
Press the + and – keys to scroll
through the functions to modify
other parameters.
WARNING: to be certain of accessing the NORMAL OPERATION
display state, the starting point for accessing the BASIC MENU,
press the MENU key twice
UP DOWN
MENU
To access the value modiica-
tion function, press the MENU
key for 1 second, until the va-
lue starts to lash quickly.
UP DOWN
MENU
Press the MENU key quickly to
quit the menu.
UP DOWN
MENU
SBS
UP DOWN
MENU
SBS
UP DOWN
MENU
Press the + and – keys to to
modify the value.