Paperfeed Unit Clutch Removal - Lexmark X295 Service Manual

10.
Use a flat blade screwdriver to depress the tab on the inner multi-purpose paper guide.
11.
Gently lift and remove the inner multi-purpose paper guide from the paper feed unit. This guide will be used
on the new paper feed unit.

Paperfeed unit clutch removal

Note: This procedure applies to all the clutches on the paperfeed unit.
1.
Remove the paperfeed unit. See
2.
Disconnect the wiring harness (A) from the clutch.
3.
Remove the e-clip (B) securing the clutch to the shaft.
Note: When reinstalling the clutch make sure the clutch stopper on the paperfeed unit is lined up with the stop
on the clutch.
"Power supply fan removal" on page
7541-03x
4-55.
4-183
Repair information
Previous
Next
Go Back