Led Print Head Removal - Lexmark X295 Service Manual

LED print head removal

1.
Remove the LED assembly. See
2.
Using a screw driver, pull the plastic casing (A) on the rear of the holder away from the tab on the
printhead, releasing it from the printhead holder.
3.
Repeat the previous step for the front of the printhead assembly.
4.
Remove the printhead from the LED assembly.
5.
Carefully remove the ribbon cable (B) from the printhead.
"LED assembly removal" on page
7541-03x
4-29.
Repair information
Previous
Next
Go Back
4-31