Drive Unit - Lexmark X295 Service Manual

Drive unit

1.
Remove the plastic drive unit cover. See
2.
Remove the engine board and engine board mounting bracket. See
(not a FRU)" on page
3.
Disconnect the drive motor wiring harnesses from the engine board.
4.
Remove the three screws (A) in the upper left corner.
5.
Remove the screw (B) between the two leftward motors.
"Drive unit cover (not a FRU)" on page
4-75.
A
4-77.
"Engine board and mount removal
Repair information
7541-03x
Previous
Next
Go Back
4-79