Precor P80 Operating And Maintaining page 34

32
To change the Maintenance settings and view the
treadmill's current status:
1.
2. Touch Maintenance.
The Recommended Action heading on the Maintenance
screen advises you whether or not the treadmill needs
attention at this time. The three detail lines below this
heading provide additional information. You can touch each of
these detail lines for more information about the type of
maintenance that is due, and clear maintenance alerts using a
button at the bottom of each screen.
To view and clear ...
The scheduled maintenance
alert
The treadmill belt
replacement alert
Alerts about logged system
errors
Under the Active Status Light heading, you can adjust the
appearance of the status light.
If you want to ...
Adjust the brightness of the
status light
Activate or deactivate the
pulsing blue alert for
scheduled maintenance or
belt replacement
Use the administrator code and password to view the
equipment settings.
Note: A text message to the right of the Maintenance
command provides additional information about the
service the treadmill currently needs.
Operating and Maintaining the P80 Console
Touch ...
Next Maintenance
Due
Belt Rating
Operating Condition
Touch ...
AS Light Brightness
Maintenance
Reminder
Then touch ...
Reset
Replace
Reset
And select ...
Low,
Medium, or
High
On or Off